The hydraulic shifters have wireless functionality, and this works on a CR 1632 battery. Replace your ST-R9270 / ST-R8170 shift lever battery If the circle is red, indicating a low battery level, replace yours within a month. That’s it! You will now see the battery charge level indicated by either a green or a red circle.
Next, it’ll prompt you to press a button on the right lever. To check the battery status for your levers, tap that ‘refresh’ icon - see the red arrow above.Į-Tube Cyclist will ask you to press any of the buttons on your left lever, to ‘wake up’ the shift lever. This is where you’ll see your shifters and their battery level, as well as the main battery - BT-DN300.Ĭhances are though, that your shift levers don’t immediately show their battery level.
Make sure Bluetooth is enabled on your phone, start E-Tube Cyclist, and connect to the bike.Īfter connecting successfully, open the maintenance tab. The LED will flash blue, indicating the bike is ready to connect over BluetoothLE. To connect to the bike, press-and-hold the button on the rear derailleur for 0.5 - 2 seconds.
Shimano di2 battery status android#
The app is available for both Android and iOS, and I’ve put links to the app on my Tools & Software page. 12-speed Di2 systems come with BluetoothLE/ANT connectivity out of the box, so there is no reason not to have the app. If you haven’t downloaded E-Tube Cyclist yet, make sure you do so. Check shift lever battery using E-Tube Cyclist However, if your shifter LED turns red, you have about a month to go before it’ll go completely flat - buy a new CR1632 and replace that battery as soon as possible. The LED on the shift lever will switch on, indicating the battery level: How? Well, you simply press both shift buttons at the same time for about 0.5 seconds. This method is by far the quickest and easiest, and it lets you check the battery level on a Di2 wireless shift lever in under a second. Check shift lever battery on the lever itself My favourite method is to use the buttons on the shift lever itself, so I’ll show that first. There are two ways to check the shifter’s battery level - the first is using the E-Tube Cyclist mobile app, and the other method involves pressing buttons on the shifters itself. This guide is written for the DURA-ACE R9200 ( ST-R9270) and Ultegra R8100 ( ST-R8170) levers, and will be updated for future wireless Di2 shift levers as they are released.
Shimano di2 battery status how to#
On this page, I’ll show you how to check the battery charge level of your Di2 shift levers, and how to replace the coin cell battery. You’ll need to replace these batteries after about two years. These shift levers are powered by coin cell batteries - one CR1632 per lever. Twelve-speed hydraulic Di2 shift levers can be set up to shift wirelessly.
0 kommentar(er)
